39 products
HP MSM460 Dual Radio 802.11n Access Point (WW)
J9591A
Regular price $50.00 $57.50 incl GST Save $-50.00Built-in Spectral Analysis and integrated Wireless IDS/IPS provides detection, classification and intelligent avoidance of non-802.11 interference and comprehensive threat protection. Access points can be deployed in managed or autonomous mode.
Enhanced Wi-Fi Performance
• The HP MSM 802.11n Dual Radio Access Point Series is the first three spatial stream 802.11n access point product in the industry to deliver near gigabit client access for enhanced voice and rich media applications.
Improved Coverage and Reliability
• The HP MSM 802.11n Dual Radio Access Point Series optimizes WLAN coverage and reliability with Wi-Fi Clear Connect automatic power adjustment, real-time identification of interference, and intelligent channel switching.
Comprehensive Security
• The HP MSM 802.11n Dual Radio Access Point Series provides comprehensive threat protection with integrated IDS offering granular threat detection and location tacking capabilities.
Investment Protection
• The HP MSM 802.11n Dual Radio Access Point Series provides indoor 802.11n Dual Radio indoor access points delivers industry leading Lifetime Warranty 2.0 and 3 year 24x7 phone support.
Security
• Integrated IDS support: Automated AP and client classification: reduces manual effort (administrator can override AP classification). Comprehensive detection capabilities: detects a wide range of attacks. Flexible event reporting: enables configuration of which events will result in notifications. Location tracking capabilities: helps identify the rogue device location. Flexible deployment models: supports time slicing or dedicating a radio to detect full-time. - see the controller datasheet.
Additional information
• RFC support: refer to the "Mobility Specification Sheet" for a list of RFCs and other industry standards supported by the MSM solution at http://h17007.www1.hp.com/docs/mobility/4AA3-3883ENW.pdf
Warranty and support
• Lifetime warranty 2.0: for indoor access points, Advance hardware replacement for as long as you own the product with next-business-day delivery (available in most countries)†
Specs | |
Features: | |
2.4 GHz: | ✓ |
5 GHz: | ✓ |
Maximum data transfer rate: | 1000 Mbit/s |
Ethernet LAN data rates: | 10,100,1000 Mbit/s |
Frequency band: | 2.4, 5 GHz |
Networking standards: | IEEE 802.11a,IEEE 802.11b,IEEE 802.11g,IEEE 802.11h,IEEE 802.11i,IEEE 802.11n,IEEE 802.3af |
Cabling technology: | 10/100/1000Base-T(X) |
VLAN support: | ✓ |
Quality of Service (QoS) support: | ✓ |
Security: | |
Security algorithms: | 802.1x RADIUS,EAP,EAP-TLS,EAP-TTLS,MD5,SSL/TLS,WPA,WPA-AES,WPA-TKIP,WPA2 |
MAC address filtering: | ✓ |
Protocols: | |
DHCP client: | ✓ |
Management protocols: | SNMPv2c, SNMPv3, MIB-II |
Ports & interfaces: | |
Ethernet LAN (RJ-45) ports: | 1 |
Power: | |
Power over Ethernet (PoE): | ✓ |
Power consumption (typical): | 12.9 W |
Design: | |
LED indicators: | ✓ |
Certification: | FCC, RSS-210, EN, ARIB STD-T66, IDA, MIC, RCR STD-33, ARIB STD-T71 |
Internal: | ✗ |
Antenna: | |
Antenna features: | Integrated antenna |
Antennas quantity: | 6 |
Antenna gain level (max): | 7 dBi |
Operational conditions: | |
Operating relative humidity (H-H): | 5 - 95% |
Operating temperature (T-T): | 0 - 50 °C |
Storage temperature (T-T): | -40 - 70 °C |
Storage relative humidity (H-H): | 5 - 95% |
Weight & dimensions: | |
Dimensions (WxDxH): | 156.4 x 131.7 x 49.4 mm |
Weight: | 330 g |
Other features: | |
Safety: | UL, IEC, EN, CAN/CSA |
Networking features: | Gigabit Ethernet |
Ruckus ZONEFLEX 7321
901-7321-WW00
Regular price $60.00 $69.00 incl GST Save $-60.00The ZoneFlex 7321 is the industry’s most affordable dual-steam entry-level 802.11n access point. The ZoneFlex 7321 is designed primarily for emerging markets and single AP deployments where the demand for mobile Internet services is rising but also where tighter economic constraints dictate a balance toward lower cost over sheer performance.
Weighing only 7 ounces, the Ruckus ZoneFlex 7321 is a two spatial stream (2x2:2), dual-band selectable access point (AP) that delivers the highest performance at the most competitive price point in the market.
Unlike other APs in its class, ZoneFlex 7321 supports transmit beamforming (TxBF) to increase in signal gain of up to 3 dB. In an ultra sleek, unobtrusive and lightweight form factor (7 oz. / 198 g.), the ZoneFlex 7321 supports up to 256 concurrent clients and can be deployed as a standalone wireless router in single AP environments such as a small business, remote office, or hotspot locations, or part of a centrally managed Ruckus Smart WLAN. The ZoneFlex 7321 comes with a myriad of advanced features that maximises Wi-Fi performance and capacity including airtime fairness, and capacity-driven auto channel selection (ChannelFly).
When used with the Ruckus ZoneDirector line of Smart WLAN controllers, the ZoneFlex 7321 supports the full complement of Smart O/S features such a Smart Mesh networking, guest access, client load balancing, per user thresholds and Dynamic Pre-Shared Keys.
The ZoneFlex 7321 is easily managed directly using the Web GUI, through any ZoneDirector controller, FlexMaster or via SNMP. With a limited lifetime warranty, the ZoneFlex 7321 supports 802.3af PoE or DC power along with integrated mounting for easy installation.
Features
- Transmit beamforming for extended range
- Single radio with selectable 2.4 GHz or 5 GHz option for maximum flexibility
- Airtime fairness to optimise capacity and performance
- ChannelFly - advanced channel selection and interference mitigation
- L2TP tunneling support
- Standard 802.3 af Power over Ethernet (PoE)
- Router mode with NAT and DHCP services
- Unobtrusive design with integrated mounting
- Eight BSSIDs with unique QoS and security policies
- Advanced QoS packet classification and automatic priority for latency sensitive traffic
- Limited lifetime warranty
- Dynamic, per-user rate-limiting for hotspot WLANs
- WEP, WPA-PSK (AES), 802.1X support for RADIUS and Active Directory
- Smart Mesh Networking
- Zero-IT and Dynamic PSK
- Admission control / client load balancing
- Captive portal and guest accounts
Specs | |
Features: | |
2.4 GHz: | ✓ |
5 GHz: | ✓ |
Maximum data transfer rate: | 1000 Mbit/s |
Ethernet LAN data rates: | 10,100,1000 Mbit/s |
Frequency band: | 2.4, 5 GHz |
Networking standards: | IEEE 802.11a,IEEE 802.11b,IEEE 802.11e,IEEE 802.11g,IEEE 802.11i,IEEE 802.11n,IEEE 802.1Q,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3u |
VLAN support: | ✓ |
Rate limiting: | ✓ |
Quality of Service (QoS) support: | ✓ |
Security: | |
Security algorithms: | 802.1x RADIUS,HTTPS,WEP,WPA-PSK,WPA-TKIP,WPA2-AES |
Security features: | Lightweight Directory Access Protocol (LDAP), ActiveDirectory |
Remote Authentication Dial-In User Service (RADIUS): | ✓ |
Protocols: | |
Supported network protocols: | IPv4, IPv6 |
Ports & interfaces: | |
Ethernet LAN (RJ-45) ports: | 1 |
DC-in jack: | ✓ |
Power: | |
Power over Ethernet (PoE): | ✓ |
Power consumption (typical): | 6.7 W |
Design: | |
Product colour: | White |
Cable lock slot: | ✓ |
Cable lock slot type: | Kensington |
LED indicators: | ✓ |
Certification: | WEEE, RoHS\r\nEN 60601-1-2\r\nWi-Fi Certified |
Internal: | ✗ |
Operational conditions: | |
Operating relative humidity (H-H): | 10 - 95% |
Operating temperature (T-T): | 0 - 50 °C |
Weight & dimensions: | |
Width: | 130 mm |
Depth: | 130 mm |
Height: | 28 mm |
Weight: | 198 g |
Packaging data: | |
AC adapter included: | ✗ |
Cisco C881 Integrated Services Router
C881+7-K9
Regular price $650.00 $747.50 incl GST Save $-650.00Cisco Aironet 1140 Series 802.11n Dual Band Controller based 802.11a/g/n
AIR-LAP1142N-N-K9
Regular price $95.00 $109.25 incl GST Save $-95.00RF Excellence
The Cisco Unified Wireless Network with M-Drive technology removes the mystery associated with design, implementation, and ongoing optimization of enterprise wireless networks. With Cisco M-Drive technology, IT has the tools needed to build and operate a high performance wireless network without the need for extensive RF engineering skills. Cisco M-Drive technology is a systemwide approach that manages the corporate RF spectrum, improves wireless coverage, and increases system capacity and performance. Features include:
- Radio resource management (RRM): Automated self-healing optimizes the unpredictability of RF to reduce dead spots and help ensure high availability client connections. RRM optimizes network capacity and mitigates interference by continuously monitoring and adjusting access point power and channel settings and then load balancing clients to enhance wireless coverage.
- CleanAir1 technology: Only Cisco offers a comprehensive solution to detect, classify, locate, and mitigate sources of interference, including non-Wi-Fi sources such as Bluetooth, microwave ovens, cordless phones, and more. With the ability to visualize performance-impacting interference directly from Wireless Control System (WCS), you can proactively manage the challenges of a shared wireless spectrum and optimize network performance.
Environmentally Responsible
The Cisco Aironet 1140 Series offers 802.11n performance with standard 802.3af Power over Ethernet (PoE). At only 12.95 watts of power, the 1140 Series is the only platform to combine the power of dual-radio 802.11n with the efficiency of standard PoE. Additionally, the 1140 Series is designed to operate more efficiently during off-peak hours when fewer clients are connected to the access point.
For quicker staging and installation, you can order the 1140 Series in multiunit eco-packs, which offer 10 Unified or 5 Standalone access points in a single, easy-to-open carton. Eco-packs reduce product packaging by 50 percent, preserving natural resources and reducing emissions. By eliminating unnecessary components and offering digital instead of paper documentation, the 1140 Series eco-packs will save over 2200 trees per year, which is equal to the amount of power required to heat over 65 homes for an entire year.
Specs | |
Features: | |
2.4 GHz: | ✓ |
5 GHz: | ✓ |
Maximum data transfer rate: | 300 Mbit/s |
Frequency band: | 2.4, 5 GHz |
Cabling technology: | 10/100/1000Base-T(X) |
Receiver sensitivity: | 802.11g:\n-86 dBm @ 6 Mb/s,\n-86 dBm @ 9 Mb/s,\n-86 dBm @ 12 Mb/s,\n-86 dBm @ 18 Mb/s,\n-85 dBm @ 24 Mb/s,\n-83 dBm @ 36 Mb/s,\n-78 dBm @ 48 Mb/s,\n-77 dBm @ 54 Mb/s. \n802.11a:\n-90 dBm @ 6 Mb/s,\n-90 dBm @ 9 Mb/s,\n-90 dBm @ 12 Mb/s,\n-90 dBm @ 18 Mb/s,\n-88 dBm @ 24 Mb/s,\n-85 dBm @ 36 Mb/s,\n-80 dBm @ 48 Mb/s,\n-79 dBm @ 54 Mb/s. |
Security: | |
Security algorithms: | WPA,WPA-AES,WPA-TKIP,WPA2,802.1x RADIUS |
Ports & interfaces: | |
Ethernet LAN (RJ-45) ports: | 1 |
Power: | |
Power requirements: | 100-240V, 50/60Hz |
Design: | |
Internal: | ✗ |
Performance: | |
Flash memory: | 32 MB |
Internal memory: | 128 MB |
Operational conditions: | |
Operating relative humidity (H-H): | 10 - 90% |
Operating temperature (T-T): | 0 - 40 °C |
Storage temperature (T-T): | -30 - 85 °C |
Weight & dimensions: | |
Dimensions (WxDxH): | 221 x 221 x 47 mm |
Weight: | 1.04 kg |
Packaging data: | |
Bundled software: | Cisco Unified Wireless Network Software Release 6.0, Cisco IOS Software Release 12.4(21a)JA |
Other features: | |
Supported data transfer rates: | 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps |
Compliance industry standards: | IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11h, IEEE 802.11d |
Wireless technology: | 802.11a/g/n |
Safety: | UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1 |
Connectivity LEDs: | ✓ |
AEROHIVE Hive AP350 Dual Radio 3x3 Antennas 802.11n (2) 10/100/1000 Indoor Access Point (WW)
AH-AP-350-N-W
Regular price $50.00 $57.50 incl GST Save $-50.00The AP350 provides dual concurrent (2.4Ghz and 5Ghz) radio 802.11n access and is designed for high bandwidth wireless enterprise environments. With multiple radios running 3x3 three spatial stream MIMO, the AP350 can provide an aggregate data rate up to 450Mbps.
In addition, the AP350 can support legacy 802.11a, b, and g clients and interoperate with the rest of the Aerohive Cooperative Control devices to provide a seamless enterprise-class experience for all connected users.
Flexible Hardware Platform
- Radios provide concurrent 802.11a/n & 802.11b/g/n connections without degradation in performance
- Automatic or dedicated mesh backup
- Dual Ethernet ports etherchannel or backup.
- Plenum Rated APs for indoor, office environments
- Supports 802.3af PoE or standard power adapter
- Hardware acceleration for IPsec services
- Extended Temperature Range
- USB interface for future 3G/4G services
Innovative Design
- Low profile design blends into an office environment
- Low-distraction indicator appear as gently glowing rather than bright blinking lights
Specs | |
Features: | |
2.4 GHz: | ✓ |
5 GHz: | ✓ |
Maximum data transfer rate: | 450 Mbit/s |
Wi-Fi data rate (max): | 450 Mbit/s |
Frequency band: | 2.4 - 5.95 GHz |
Networking standards: | IEEE 802.11a,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.3af |
Number of users: | 256 user(s) |
Modulation: | DSSS,OFDM |
Wi-Fi Multimedia (WMM)/(WME): | ✓ |
Quality of Service (QoS) support: | ✓ |
Security: | |
Security algorithms: | 128-bit RC4,802.1x RADIUS,TKIP,WEP,WPA,WPA-PSK,WPA2,WPA2-CCMP |
Protocols: | |
DHCP server: | ✓ |
DHCP client: | ✓ |
Ports & interfaces: | |
Ethernet LAN (RJ-45) ports: | 2 |
USB 2.0 ports quantity: | 1 |
WAN connection: | Ethernet (RJ-45) |
Power: | |
Power over Ethernet (PoE): | ✓ |
Input voltage: | 100 - 240 V |
Output voltage: | 12 V |
Output current: | 2 A |
Design: | |
Placement: | Wall |
Product colour: | White |
Cable lock slot: | ✓ |
Cable lock slot type: | Kensington |
Internal: | ✗ |
Antenna: | |
Antenna features: | Detachable antenna |
Antennas quantity: | 6 |
Antenna gain level (max): | 6 dBi |
Number of connectors: | 6 |
Operational conditions: | |
Operating relative humidity (H-H): | 5 - 95% |
Operating temperature (T-T): | -20 - 55 °C |
Storage temperature (T-T): | -40 - 80 °C |
Weight & dimensions: | |
Width: | 215 mm |
Depth: | 203 mm |
Height: | 32 mm |
Weight: | 1.36 kg |
AEROHIVE HIVE AP170 Dual Radio 2x2 802.11n (1) 10/100/1000 PoE Outdoor Access Point (missing one 5Ghz antenna)
AH-AP-170-N-W
Regular price $100.00 $115.00 incl GST Save $-100.00The AP170 is designed for high bandwidth demand outdoor wireless environments. With extended temperature range and a watertight chassis, the AP170 can deployed in most every outdoor environment on earth.
With four antennas and the ability to provide service concurrently on both 2.4Ghz and 5Ghz bands, the AP170 provides both high speed mesh and support for 802.11n as well as legacy 802.11a, b, and g clients, through Aerohive’s industry unique and resilient controller-less architecture.
Flexible Hardware Platform
- Two radios provide concurrent 802.11a/n and 802.11b/g/n connections with no degradation in performance
- Automatic or dedicated mesh backup
- Supports 802.3at PoE
- Integrated application control and prioritization
- On-device RADIUS with directory support, Captive Web Portal, DHCP server, and spectrum analysis
- Max 256 concurrent RADIUS authenticated users
- Max 512 DHCP clients per AP
Security
- Trusted Platform Module (TPM)–Hardware-based key storage and encryption
- Wireless privacy & authentication Wi-Fi CERTIFIED™ WPA™ and WPA2™, 802.11i, WEP, 802.1x, PSK
- Granular user profile-based management defines QoS, mobility policies, and security policies for each user that enters the network
- Encryption: AES:CCMP, TKIP, and RC4 (WEP only)
- Marking and policing–WMM™ (802.11e) for wireless, 802.1p and/or DiffServ
- Wi-Fi CERTIFIED WMM
- WMM power save (U-APSD)
Specs | |
Features: | |
2.4 GHz: | ✓ |
5 GHz: | ✓ |
Maximum data transfer rate: | 300 Mbit/s |
Ethernet LAN data rates: | 10,100,1000 Mbit/s |
Frequency band: | 2.4 - 5.95 GHz |
Networking standards: | IEEE 802.11a,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.3at |
Modulation: | DSSS,OFDM |
Ports & interfaces: | |
Ethernet LAN (RJ-45) ports: | 1 |
WAN connection: | Ethernet (RJ-45) |
Power: | |
Power over Ethernet (PoE): | ✓ |
Design: | |
Product colour: | Grey |
Internal: | ✗ |
Antenna: | |
Antenna features: | Detachable antenna |
Antennas quantity: | 4 |
Antenna connector type: | N-type |
Operational conditions: | |
Operating relative humidity (H-H): | 5 - 95% |
Operating temperature (T-T): | -40 - 55 °C |
Storage temperature (T-T): | -40 - 80 °C |
Storage relative humidity (H-H): | 5 - 95% |
Weight & dimensions: | |
Weight: | 1.95 kg |
Aerohive AP 330 Wireless Access Point 802.11abgn, 2.4-5.95GHz, 6.0 dBi, 2x 10/100/1000 Base-T, USB 2.0
AH-AP330-N-W
Regular price $50.00 $57.50 incl GST Save $-50.00The AP330 is a high performing and highly reliable 802.11n access point. The AP330 provides high performance dual concurrent (2.4GHz and 5GHz) 802.11n 3x3 with three spatial stream MIMO (450 Mbps per radio) as well as dual 10/100/1000 Ethernet port service.
The AP330 is an enterprise-grade, (3x3) MIMO solution, designed for high bandwidth demand wireless enterprise environments. With multiple radios and the ability to provide service concurrently on both 2.4Ghz and 5Ghz bands, the AP330 can provide up to an aggregate data rate of 450 Mbps. The AP330 provides both mesh and support for legacy 802.11a, b, and g clients, through Aerohive’s industry unique and resilient controller-less architecture.
Flexible Hardware Platform
- Radios provide concurrent 802.11a/n and 802.11b/g/n connections with no degradation in performance
- Automatic or dedicated mesh backup
- Dual Ethernet ports for etherchannel or backup connectivity.
- Plenum Rated APs for indoor, office environments
- Supports 802.3af PoE or standard power adapter
- USB interface for future 3G/4G services
- Hardware acceleration for iPsec services
- Extended Temperature Range
Innovative Design
- Low profile design blends well into an office environment
- Low-distraction indicators appear as gently glowing rather than bright blinking lights
Security
- Trusted Platform Module (TPM)–Hardware-based key storage and encryption
- Wireless privacy & authentication Wi-Fi CERTIFIED™ WPA™ and WPA2™, 802.11i, WEP, 802.1x, PSK
- Granular user profile-based management defines QoS, mobility policies, and security policies for each user that enters the network
- Encryption: AES:CCMP, TKIP, and RC4 (WEP only)
Anti-Theft
- Designed to work with Kensington-style locks
- Tamper-proof security screw (with bracket option)
Hardware QoS Features
- Marking and policing–WMM™ (802.11e) for wireless, 802.1p and/or DiffServ
- Wi-Fi CERTIFIED WMM, WMM power save (U-APSD)
Routing and Wired LAN
- Supports 3G/4G backhaul to provide mobile access connectivity from anywhere in the world
- Supports unified wired and wireless layer 3 access policies across Ethernet and Wi-Fi
Specs | |
Features: | |
2.4 GHz: | ✓ |
5 GHz: | ✓ |
Maximum data transfer rate: | 450 Mbit/s |
Wi-Fi data rate (max): | 450 Mbit/s |
Ethernet LAN data rates: | 10,100,1000 Mbit/s |
Frequency band: | 2.4 - 5.95 GHz |
Networking standards: | IEEE 802.11a,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.3af,IEEE 802.3at |
Number of users: | 256 user(s) |
Modulation: | DSSS,OFDM |
Wi-Fi Multimedia (WMM)/(WME): | ✓ |
Quality of Service (QoS) support: | ✓ |
Security: | |
Security algorithms: | 128-bit RC4,802.1x RADIUS,TKIP,WEP,WPA,WPA2,WPA2-CCMP |
Protocols: | |
DHCP server: | ✓ |
DHCP client: | ✓ |
Ports & interfaces: | |
Ethernet LAN (RJ-45) ports: | 2 |
USB 2.0 ports quantity: | 1 |
WAN connection: | Ethernet (RJ-45) |
DC-in jack: | ✓ |
Power: | |
Input voltage: | 100 - 240 V |
Input frequency: | 50 - 60 Hz |
Output voltage: | 12 V |
Output current: | 0.625 A |
Design: | |
Placement: | Ceiling, Table, Wall |
Product colour: | White |
Cable lock slot: | ✓ |
Cable lock slot type: | Kensington |
Reset button: | ✓ |
Internal: | ✗ |
Antenna: | |
Antenna features: | Integrated antenna |
Antennas quantity: | 6 |
Antenna gain level (max): | 6 dBi |
Operational conditions: | |
Operating relative humidity (H-H): | 5 - 95% |
Operating temperature (T-T): | 0 - 40 °C |
Storage temperature (T-T): | -20 - 70 °C |
Weight & dimensions: | |
Width: | 200 mm |
Depth: | 200 mm |
Height: | 38 mm |
Weight: | 680 g |
Xirrus XN8 WiFi Array , ArrayOS Version 5.0-1556
XN8
Regular price $50.00 $57.50 incl GST Save $-50.00ENGENIUS EAP350 Wireless Access Point
EAP350
Regular price $50.00 $57.50 incl GST Save $-50.00SONICWALL APL21-06E Wireless Access Point
APL21-06E
Regular price $50.00 $57.50 incl GST Save $-50.00HP Wireless Edge Services zl Module
J9051A
Regular price $1,500.00 $1,725.00 incl GST Save $-1,500.00Ubiquiti UniFi Outdoor
WIFIUAP-OUTDOOR
Regular price $270.00 $310.50 incl GST Save $-270.00HP MSM720 Premium Mobility Controller (WW)
J9694A
Regular price $400.00 $460.00 incl GST Save $-400.00networking solutions. The enhanced architecture scales to 802.11n without requiring controller
replacement. Robust identity- and roles-based user account profiles, as well as Virtual Service
Communities (VSCs) with independently configurable Quality of Service (QoS), authentication, encryption, and VLAN support, deliver intelligence to the network edge. Scalable from small to larger deployments, the MSM wireless controllers support a fast-roaming capability. Wireless security is comprehensive with support for internal and external authentication, authorization, and accounting (AAA) servers, built-in stateful firewall, per-user VLAN mapping, and authentication.
- Ease of use, scalability, and redundancy.
- Enhanced architecture for flexible network design.
- IEEE 802.11a/b/g/n AP and access device support.
- Comprehensive WLAN security.
- Appliance and blade form factors.
Specs | |
Security: | |
MAC address filtering: | ✓ |
Network: | |
Networking standards: | IEEE 802.3,IEEE 802.3u,IEEE 802.3ab |
Wi-Fi: | ✓ |
Data transfer rate: | 1 Gbit/s |
Supported data transfer rates: | 10/100/1000Mbit/s |
Cabling technology: | 10/100/1000Base-T(X) |
WLAN data transfer rates supported: | 11,54,300 Mbit/s |
Ports & interfaces: | |
Ethernet LAN (RJ-45) ports: | 6 |
Weight & dimensions: | |
Weight: | 1.64 kg |
Dimensions (WxDxH): | 254 x 159.5 x 44.5 mm |
Power: | |
Power requirements: | 100-240 |
Power consumption (typical): | 20 W |
Input frequency: | 50 / 60 Hz |
Input voltage: | 100 - 240 V |
Operational conditions: | |
Operating temperature (T-T): | 5 - 45 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 15 - 95% |
Storage relative humidity (H-H): | 15 - 95% |
Plug and Play: | ✓ |
Full duplex: | ✓ |
Wireless connection: | ✓ |
Certificates: | |
Safety: | UL 60950-1, IEC 60950-1, EN 60950-1, CAN/CSA-C22.2 No. 60950-1 |
Certification: | FCC part 15 Class A, EN 55022 Class A, CISPR\n22 Class A, ICES-003 |
HP Indoor Omnidirectional Dual Band 2.5/6dBi MIMO 6 Element Antenna
J9659A
Regular price $65.00 $74.75 incl GST Save $-65.00Specs | |
Performance: | |
Antenna gain level (max): | 5.9 dBi |
Frequency band: | 2.4/5 GHz |
Antenna gain (2.4 GHz): | 2.5 dBi |
Antenna gain (5 GHz): | 5.9 dBi |
Features: | |
Antenna type: | Omni-directional antenna |
Antenna connector type: | RP-SMA |
Connector gender: | Male |
Polarization: | Vertical polarization |
Cable length: | 0.8 m |
Purpose: | Indoor |
Product colour: | Black, Silver, White |
Weight & dimensions: | |
Weight: | 700 g |
Other features: | |
Frequency range: | 2.4-2.5 GHz, 5.15-5.85 GHz |
HP MSM466 Dual Radio 802.11n Access Point (WW)
J9622A
Regular price $270.00 $310.50 incl GST Save $-270.00Built-in Spectral Analysis and integrated Wireless IDS/IPS provides detection, classification and intelligent avoidance of non-802.11 interference and comprehensive threat protection. Access points can be deployed in managed or autonomous mode.
Enhanced Wi-Fi Performance
• The HP MSM 802.11n Dual Radio Access Point Series is the first three spatial stream 802.11n access point product in the industry to deliver near gigabit client access for enhanced voice and rich media applications.
Improved Coverage and Reliability
• The HP MSM 802.11n Dual Radio Access Point Series optimizes WLAN coverage and reliability with Wi-Fi Clear Connect automatic power adjustment, real-time identification of interference, and intelligent channel switching.
Comprehensive Security
• The HP MSM 802.11n Dual Radio Access Point Series provides comprehensive threat protection with integrated IDS offering granular threat detection and location tacking capabilities.
Investment Protection
• The HP MSM 802.11n Dual Radio Access Point Series provides indoor 802.11n Dual Radio indoor access points delivers industry leading Lifetime Warranty 2.0 and 3 year 24x7 phone support.
Security
• Integrated IDS support: Automated AP and client classification: reduces manual effort (administrator can override AP classification). Comprehensive detection capabilities: detects a wide range of attacks. Flexible event reporting: enables configuration of which events will result in notifications. Location tracking capabilities: helps identify the rogue device location. Flexible deployment models: supports time slicing or dedicating a radio to detect full-time. - see the controller datasheet.
Additional information
• RFC support: refer to the "Mobility Specification Sheet" for a list of RFCs and other industry standards supported by the MSM solution at http://h17007.www1.hp.com/docs/mobility/4AA3-3883ENW.pdf
Warranty and support
• Lifetime warranty 2.0: for indoor access points, Advance hardware replacement for as long as you own the product with next-business-day delivery (available in most countries)†
Specs | |
Features: | |
Maximum data transfer rate: | 1000 Mbit/s |
Ethernet LAN data rates: | 10,100,1000 Mbit/s |
Cabling technology: | 10/100/1000Base-T(X) |
VLAN support: | ✓ |
Quality of Service (QoS) support: | ✓ |
Security: | |
Security algorithms: | 802.1x RADIUS,EAP,EAP-TLS,EAP-TTLS,MD5,SSL/TLS,WPA,WPA-AES,WPA-TKIP,WPA2 |
MAC address filtering: | ✓ |
Protocols: | |
DHCP client: | ✓ |
Management protocols: | SNMPv2c, SNMPv3, MIB-II |
Ports & interfaces: | |
Ethernet LAN (RJ-45) ports: | 2 |
Power: | |
Power over Ethernet (PoE): | ✓ |
Power consumption (typical): | 12.9 W |
Design: | |
LED indicators: | ✓ |
Certification: | FCC, RSS-210, EN, ARIB STD-T66, IDA, MIC, RCR STD-33, ARIB STD-T71 |
Internal: | ✗ |
Antenna: | |
Antenna connector type: | RP-SMA |
Operational conditions: | |
Operating relative humidity (H-H): | 5 - 95% |
Operating temperature (T-T): | 0 - 50 °C |
Storage temperature (T-T): | -40 - 70 °C |
Storage relative humidity (H-H): | 5 - 95% |
Weight & dimensions: | |
Dimensions (WxDxH): | 156.4 x 131.7 x 49.4 mm |
Weight: | 330 g |
Other features: | |
Supported data transfer rates: | 10/11/54/100/300/450 Mbit/s |
Compliance industry standards: | IEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.11a/b/g/n, IEEE 802.11d, IEEE 802.11i |
Wireless technology: | 802.11a/b/g/n |
Safety: | UL, IEC, EN, CAN/CSA |
Networking features: | Gigabit Ethernet |
Hewlett Packard Enterprise E -MSM410 54 Mbit/s Power over Ethernet (PoE)
J9427B
Regular price $135.00 $155.25 incl GST Save $-135.00Intrusion detection/prevention system (IPS/IDS)
• Protection against rogue IEEE 802.11a/b/g/n access points and wireless clients: HP E-MSM415 RF Security Sensors continuously scan for detection, classification, and prevention of wireless threats on IEEE 802.11a/b/g and 802.11n wireless networks
Connectivity
• Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 ports
Mobility
• Anywhere, anytime wireless coverage: - Single- and dual-radio IEEE 802.11a/b/g and 802.11n access points. - Per-radio software-selectable configuration of frequency bands. - Self-healing, self-optimizing local mesh extends network availability . - Wi-Fi Alliance Certified for interoperability with all IEEE 802.11a/b/g/n client devices . - IEEE 802.3af PoE or external power cord on selected models .
Security
• Choice of IEEE 802.11i, Wi-Fi Protected Access 2 (WPA2), or WPA: locks out unauthorized wireless access by authenticating users prior to granting network access; robust Advanced Encryption Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of the wireless traffic
Quality of Service (QoS)
• IEEE 802.1p prioritization: delivers data to devices based on the priority and type of traffic
Warranty and support
• Lifetime Warranty: - for as long as you own the product, with next-business-day advance replacement (available in most countries) .
Specs | |
Features: | |
2.4 GHz: | ✓ |
Maximum data transfer rate: | 54 Mbit/s |
Ethernet LAN data rates: | 10,100,1000 Mbit/s |
Frequency band: | 2.41 - 2.46, 5.18 - 5.83 GHz |
Cabling technology: | 10/100/1000Base-T(X) |
Quality of Service (QoS) support: | ✓ |
Security: | |
Security algorithms: | EAP-TLS,EAP-TTLS,MD5,PEAP,WPA,WPA2 |
MAC address filtering: | ✓ |
Protocols: | |
Supported network protocols: | DHCP |
Management protocols: | SNMP v2c,v3 |
Ports & interfaces: | |
Ethernet LAN (RJ-45) ports: | 1 |
DC-in jack: | ✓ |
Power: | |
Power over Ethernet (PoE): | ✓ |
Power consumption (typical): | 8 W |
Design: | |
Certification: | FCC, ICES |
Operational conditions: | |
Operating relative humidity (H-H): | 5 - 95% |
Operating temperature (T-T): | 0 - 50 °C |
Weight & dimensions: | |
Dimensions (WxDxH): | 156.4 x 131.7 x 49.4 mm |
Weight: | 330 g |
Other features: | |
Compliance industry standards: | IEEE 802.3, IEEE 802.3af, IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
HPE HP Wireless Access Point MSM317 WW 10/100-TX 4-Port/1xRJ-45 Pass-Thru Port
J9423A
Regular price $45.00 $51.75 incl GST Save $-45.00Quality of Service (QoS)
- IEEE 802.1p prioritization: delivers data to devices based on the priority and type of traffic
- SpectraLink voice priority (SVP) support: prioritizes SpectraLink voice IP packets sent from a SpectraLink NetLink SVP server to SpectraLink wireless voice handsets to help ensure excellent voice quality
- Wireless: - L2/L3/L4 classification: IEEE 802.1p VLAN priority, SpectraLink SVP and DiffServ. - Wi-Fi MultiMedia (WMM), IEEE 802.11e EDCF, and Service-Aware priority assigned by VSC. - Maximum VoIP call capacity: 8 active calls on IEEE 802.11b/g.
- Network management: - Fully manageable using HP Manager and HP Mobility Manager. - SNMP v2c, SNMP v3, MIB-II with Traps, and RADIUS Authentication Client MIB (RFC 2618). - Embedded HTML management tool with secure access (SSL and VPN). - Scheduled configuration and firmware upgrades from central server.
- Diagnostic: - Client event log records association, authentication, and DHCP events. - Packet capture tool for Ethernet and IEEE 802.11 interfaces (PCAP format). - Data rate matrix.
Connectivity
- Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 ports;
- IEEE 802.3af Power over Ethernet support: simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location. Unit can be powered by 802.3af or PoE+ source;
- Power Forwarding: PoE Class 2 (6.49W) when powered by 802.3af.
Mobility
- Anywhere, anytime wireless coverage: - Single radio IEEE 802.11b/g access points with integrated antenna. - Per-radio software-selectable configuration of frequency bands. - Self-healing, self-optimizing local mesh extends network availability;
- Interoperability: Wi-Fi Alliance certifications, including IEEE 802.11g Wi-Fi and WPA2 to help ensure multivendor interoperability;
- Virtual Service Communities (VSCs): - Up to 16 SSIDs, each with unique MAC address, configurable SSID broadcasts. - Individual security and QoS profiles per VSC. - Configurable DTIM and minimum data rate per VSC. - Each VSC mapped to separate VLANs. - WMM and/or WMM-PS . - Security filter. - IP filter;
- AP client access control functions: - IEEE 802.1X authentication using EAP-SIM, EAP-FAST, EAP-TLS, EAP-TTLS, and PEAP. - MAC address authentication using local or RADIUS access lists. - RADIUS AAA using EAP-MD5, PAP, CHAP, and MS-CHAPv2. - RADIUS Client (RFC 2865 and 2866) with location-aware support. - Layer 2 wireless client isolation;
- Captive portal functions: - Splash page advertisement support. - New user versus already registered. - Ad page advertisement support. - Static advertizing support. - Frame insertion support. - Static advertizing support.
Security
- Choice of IEEE 802.11i, WPA2, or WPA: locks out unauthorized wireless access by authenticating users prior to granting network access; robust Advanced Encryption Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of wireless traffic;
- Local wireless bridge client traffic filtering: when enabled, prevents communication between wireless devices associated with the same access point;
- IEEE 802.1X: provides port-based user authentication with support for Extensible Authentication Protocol (EAP) MD5, TLS, TTLS, and PEAP with choice of AES, TKIP, and static or dynamic WEP encryption for protecting wireless traffic between authenticated clients and the access point.
Specs | |
Product colour: | Beige |
Networking standards: | IEEE 802.3,IEEE 802.3u |
Ports & interfaces: | |
Ethernet LAN (RJ-45) ports: | 5 |
Weight & dimensions: | |
Width: | 54.6 mm |
Height: | 86.1 mm |
Depth: | 86.1 mm |
Weight: | 170 g |
J9423-61001 - Hewlett Packard HP Procurve MSM317 WW Access DEV
J9423-61001
Regular price $45.00 $51.75 incl GST Save $-45.00HP MSM760 Access Controller
J9421A
Regular price $400.00 $460.00 incl GST Save $-400.00Quality of Service (QoS)
- Rate limiting: supports per-wireless client ingress-enforced maximums and per-wireless client, per-queue guaranteed minimums
- Diagnostic: client event log records association, authentication, and DHCP events; includes a packet capture tool for Ethernet and IEEE 802.11 interfaces (PCAP format), a wireless client data rate matrix, and a client status page; complete session logging provides detailed information for problem identification and resolution
- Centralized traffic: Layer 2 and Layer 3 QoS settings are maintained when using Mobility Traffic Manager or guest access
Firewall
- Stateful firewall: enforces firewall policies to control traffic and filter access to network services; maintains session information for every connection passing through it, enabling the firewall to control packets based on existing sessions
- NAT/PAT: choice of dynamic partial address translation (PAT) or static network address translation (NAT) preserves a network's IP address pool or conceals the private address of network resources, such as Web servers, which are made accessible to users of a guest or public wireless LAN
- Authenticated network access: authenticates users with an internal or external RADIUS server or Microsoft® Active Directory before allowing full network connectivity
Management
- Automated work flows: Initial controller settings: define basic operational settings for the controller, including network connections, security settings, and system time. Wireless network for employees: enables setup of a new wireless network for employees, including network and security settings. Wireless network for guests: provides wireless access for guest users, including network and security settings specific to guest access.
- Remote configuration and management: are available through secure Web browser, command-line (console port or SSH), SOAP, or SNMP
- Management interface control: allows interfaces to be enabled or disabled depending on security preferences
- Management VLAN: segments traffic to and from management interfaces, including CLI,Web browser interface, and SNMP
- RADIUS accounting support: separates RADIUS accounting server support per SSID; provides detailed session, usage, and billing information for each client activity
Connectivity
- 10 GbE connections to the switch fabric (MSM765 zl Premium Mobility controller only): two 10-GbE wire-speed internal connections help ensure that the network connections from the application to the switch backplane will not limit application performance
- IPv6 wireless client traffic forwarding: is supported for Layer 2 and Layer 3 mobility (MTM) and for client traffic directly bridged at the AP
- IEEE 802.3ad Link Aggregation Control Protocol (LACP) and HP port trunking (MSM720 controller only): support up to six ports bonded via LACP; support manually configured trunks between an HP switch and the controller
Performance
- High-performance processor system: MSM720: Freescale Dual Core 800MHZ P1020 Processor with a 256 KB cache in an appliance designed for 10 to 40 APs . MSM760: Intel® Core™ 2 Duo Processor E6400 with 2.13 GHz and 2 MB cache in an appliance designed for larger environments. MSM765 zl: Intel Core 2 Duo Processor T7500 with 2.2 GHz and 4 MB cache in a single-switch slot designed for larger chassis-based environments.
- Memory subsystems: 4/2/1 GB of memory (MSM765 (DDR2)zl/MSM760 (DDR2)/MSM720 (DDR3) provides enhanced application performance
- Disk drive (MSM76x): 250 GB SATA II 7200 rpm hard disk drive allows rapid data reads/writes, providing improved application performance
Mobility
- Solutions enhanced for businesses: MSM7xx controllers deliver services for a range of vertical markets, including healthcare, hospitality, education, manufacturing, transportation, and service providers
- Powerful security capabilities: robust, identity- and role-based user account profiles use internalor external AAA services
- Solutions that cover the most important WLAN applications: HP MSM solutions deliver rich application support, including guest access, location-based services, Voice over Wi-Fi (VoWi-Fi), hotspot, surveillance, and secure point of sale
- Capacity that scales from small office to large campus: efficiently deploy wireless LANs (WLANs) with the MSM710 controller, which controls up to 10 APs; the MSM720 controller, which supports 10 to 40 APs; and the MSM760 and MSM765 zl controllers, which control 40 to 200 APs
- Premium Mobility Scalability Features: Virtual controller: allows you to configure a team of up to 800 APs and up to five controllers (MSM76x) or 40 APs across two controllers (MSM720) managed via a single IP address. N+1 redundancy: teaming provides N+1 redundancy . Seamless failover: APs can fail-over without rebooting, which preserves network mobility services for wireless clients when the client traffic is bridged locally at the AP. 64 VSC profiles: up to 64 profiles can be defined.
Security
- Secure Shell: encrypts all transmitted data for secure remote CLI access over IP networks
- Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
- IEEE 802.1X, Active Directory, and RADIUS network logins: control wireless network access for authentication and accountability using IEEE 802.1x, Microsoft Active Directory, and RADIUS
- RADIUS-based MAC authentication: authenticates a wireless client with a RADIUS server based on the MAC address of the client; this is useful for clients with minimal or no user interface
- Web-based authentication: provides a Web browser-based environment to authenticate clients that may not support the IEEE 802.1X supplicant
Specs | |
Ports & interfaces: | |
Ethernet LAN (RJ-45) ports: | 2 |
Weight & dimensions: | |
Weight: | 6.1 kg |
Dimensions (WxDxH): | 439.9 x 390.7 x 44.5 mm |
Power: | |
Heat dissipation: | 434 BTU/h |
Input current: | 2/1 A |
Input frequency: | 50 - 60 Hz |
Input voltage: | 100 - 240 V |
Operational conditions: | |
Operating temperature (T-T): | 5 - 40 °C |
Storage temperature (T-T): | -40 - 65 °C |
Electromagnetic compatibility: | FCC, EN 55022, CISPR 22, ICES-003 |
Certificates: | |
Safety: | UL 60950-1; CAN/CSA 22.2 No. 60950-1; IEC 60950-1; EN 60950-1 |
Design: | |
Mounting type: | Rack mounting |
HP ProCurve MSM760 Mobility Controllers
J9420A
Regular price $850.00 $977.50 incl GST Save $-850.00Working in unison with HP E-series MultiService Mobility Access Points, HP E-series MultiService Mobility Controllers deliver high-performing networking solutions for the mid-market. The enhanced architecture scales from IEEE 802.11b to 802.11n without requiring expensive controller upgrades. Robust identity and roles-based user account profiles, as well as Virtual Service Communities (VSCs) with independently configurable Quality of Service (QoS), authentication, encryption, and VLAN support, deliver intelligence to the edge of the network. Scalable from small to large mid-market deployments, the E-series wireless controllers deliver a fast-roaming capability. Wireless security is comprehensive with support for internal and external authentication, authorization, and accounting (AAA) servers, built-in stateful firewall, per-user VLAN mapping, and mutual controller/access point (AP) authentication.
Features
Firewall
• Stateful firewall: enforces firewall policies to control traffic and filter access to network services; maintains session information for every connection passing through it, enabling the firewall to control packets based on existing sessions
Management
• Complete session logging: provides detailed information for problem identification and resolution
Connectivity
• 10-GbE connections to the switch (for E-MSM765zl mobility controller): two 10-GbE wire-speed internal connections help ensure that the network connections from the application to the switch backplane will not limit application performance
Performance
• High performance processor system: - E-MSM765zl: Intel Core 2 Duo Processor T7500 with 2.2 GHz, 4 MB cache provides a high performance compute environment in a small footprint using a single-switch slot. - E-MSM760: Intel Core 2 Duo Processor E6400 with 2.13 GHz, 2 MB cache provides a high performance compute environment in an appliance form factor. .
Mobility
• Solutions enhanced for businesses: HP E-series MSM7xx controllers deliver services for a range of vertical markets, including healthcare, hospitality, education, manufacturing, transportation, and service providers
Security
• Secure Shell (SSHv2): encrypts all transmitted data for secure, remote command-line interface (CLI) access over IP networks
Quality of Service (QoS)
• Rate limiting: sets per-port ingress enforced maximums and per-port, per-queue guaranteed minimums
Specs | |
Ports & interfaces: | |
Connectivity technology: | Wired |
Host interface: | RJ-45 |
Interface: | Ethernet |
Network: | |
Maximum data transfer rate: | 1000 Mbit/s |
Networking standards: | IEEE 802.11a,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n |
Ethernet LAN: | ✓ |
Wi-Fi: | ✓ |
Full duplex: | ✓ |
Design: | |
Internal: | ✗ |
Rack mounting: | ✓ |
Form factor: | 1U |
Heat dissipation: | 434 BTU/h |
Safety: | UL 60950-1; CAN/CSA 22.2 No. 60950-1; IEC 60950-1; EN 60950-1 |
Power: | |
Input current: | 2/1 A |
Power consumption (typical): | 127 W |
Operational conditions: | |
Operating temperature (T-T): | 5 - 40 °C |
Operating relative humidity (H-H): | 15 - 80% |
Weight & dimensions: | |
Width: | 439.9 mm |
Depth: | 390.7 mm |
Height: | 44.5 mm |
Weight: | 6.1 kg |
Other features: | |
Compliance industry standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab |
Ports quantity: | 3 |
Size (imperial): | 48.3 cm (19") |
Allied Telesis AT TQ2450 - wireless access point
AT-TQ2450
Regular price $60.00 $69.00 incl GST Save $-60.00802.11a/g/n, 300Mbit/s, 2.4-5 GHz, 10/100/1000BASE-T, 128 MB DRAM, 32 MB Flash
AIR-CAP3502I-N-K9
Regular price $180.00 $207.00 incl GST Save $-180.00RF Excellence
Building on the Cisco Aironet heritage of RF excellence, the 3500 Series delivers industry-leading performance for secure and reliable wireless connections. Enterprise-class silicon and optimized radios deliver a robust mobility experience using Cisco M-Drive technology, which includes:
- ClientLink improves reliability and coverage for legacy clients
- BandSelect improves 5-GHz client connections in mixed client environments
- VideoStream uses multicast to improve rich-media applications
All of these features help ensure the best possible end-user experience on the wireless network.
Cisco also offers the industry's broadest selection of 802.11n antennas delivering optimal coverage for a variety of deployment scenarios.
Scalability
The Cisco Aironet 3500 Series is a component of the Cisco Unified Wireless Network, which can scale up to 18,000 access points with full Layer 3 mobility across central or remote locations on the enterprise campus, in branch offices, and at remote sites. The Cisco Unified Wireless Network is the industry's most flexible, resilient, and scalable architecture, delivering secure access to mobility services and applications and offering the lowest total cost of ownership and investment protection by integrating seamlessly with the existing wired network.
Specs | |
Features: | |
2.4 GHz: | ✓ |
5 GHz: | ✓ |
Maximum data transfer rate: | 300 Mbit/s |
Ethernet LAN data rates: | 10,100,1000 Mbit/s |
Frequency band: | 2.4 - 5 GHz |
Networking standards: | IEEE 802.11a,IEEE 802.11b,IEEE 802.11g,IEEE 802.11h,IEEE 802.11i,IEEE 802.1x,IEEE 802.3af |
Cabling technology: | 10/100/1000BASE-T(X) |
Channels quantity: | 13 channels |
Security: | |
Security algorithms: | TKIP,WPA,WPA2 |
Management features: | |
Web-based management: | ✗ |
Ports & interfaces: | |
Ethernet LAN (RJ-45) ports: | 2 |
DC-in jack: | ✓ |
Power: | |
Power requirements: | 100-240V, 50/60Hz |
Design: | |
Certification: | FCC 15.247, 15.407, RSS-210, EN 300.328, EN 301.893, ARIB-STD 33, ARIB-STD 66, ARIB-STD T71, \nEMI, FCC 15.107, 15.109, ICES-003, VCCI, EN 301.489-1, -17, EN 60601-1-2 |
Internal: | ✗ |
Antenna: | |
Antenna features: | Detachable antenna |
Antennas quantity: | 6 |
Antenna gain level (max): | 6 dBi |
Performance: | |
Flash memory: | 32 MB |
Internal memory: | 128 MB |
Operational conditions: | |
Operating relative humidity (H-H): | 10 - 90% |
Operating temperature (T-T): | 0 - 40 °C |
Storage temperature (T-T): | -30 - 85 °C |
Weight & dimensions: | |
Dimensions (WxDxH): | 221 x 221 x 47 mm |
Weight: | 1.04 kg |
Other features: | |
Supported data transfer rates: | 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 |
Compliance industry standards: | IEEE 802.11a/b/g, IEEE 802.11n 2.0, IEEE 802.11h, IEEE 802.11d |
Wireless technology: | 802.11a/g/n |
Safety: | UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1 |
Networking features: | Gigabit Ethernet |
CISCO AIR CAP3502e Series, Dual-band, N-Reg, 11-ch 2.4/5GHz, 300 Mb/s, 802.11a/g/n, Ext 2x3 MIMO, Gigabit Ethernet, Acess Point, White
AIR-CAP3502E-N-K9
Regular price $145.00 $166.75 incl GST Save $-145.00Cisco® Aironet® 3500 Series Access Points with Cisco CleanAir technology are the industry's first 802.11n access points to create a self-healing, self-optimizing wireless network. CleanAir technology is a systemwide feature of the Cisco Unified Wireless Network that improves air quality by detecting RF interference that other systems can't recognize, identifying the source, locating it on a map, and then making automatic adjustments to optimize wireless coverage. These innovative access points provide the highest-performance 802.11n connectivity for mission-critical mobility. By intelligently avoiding interference, the 3500 Series offers performance protection for 802.11n networks to help ensure reliable application delivery.
RF Excellence
Building on the Cisco Aironet heritage of RF excellence, the 3500 Series delivers industry-leading performance for secure and reliable wireless connections. Enterprise-class silicon and optimized radios deliver a robust mobility experience using Cisco M-Drive technology, which includes:
- ClientLink improves reliability and coverage for legacy clients;
- BandSelect improves 5-GHz client connections in mixed client environments;
- VideoStream uses multicast to improve rich-media applications;
- All of these features help ensure the best possible end-user experience on the wireless network.
Scalability
The Cisco Aironet 3500 Series is a component of the Cisco Unified Wireless Network, which can scale up to 18,000 access points with full Layer 3 mobility across central or remote locations on the enterprise campus, in branch offices, and at remote sites. The Cisco Unified Wireless Network is the industry's most flexible, resilient, and scalable architecture, delivering secure access to mobility services and applications and offering the lowest total cost of ownership and investment protection by integrating seamlessly with the existing wired network.
Specs | |
Features: | |
2.4 GHz: | ✓ |
5 GHz: | ✓ |
Maximum data transfer rate: | 1000 Mbit/s |
Ethernet LAN data rates: | 10,100,1000 Mbit/s |
Frequency band: | 2.4, 5 GHz |
Networking standards: | IEEE 802.11a,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.3,IEEE 802.3ab,IEEE 802.3u |
Cabling technology: | 10/100/1000Base-T(X) |
Channels quantity: | 11 channels |
MIMO: | ✓ |
Receiver sensitivity: | 802.11b -101 dBm @ 1 Mb/s\n802.11b -98 dBm @ 2 Mb/s\n802.11b -92 dBm @ 5.5 Mb/s\n802.11b -89 dBm @ 11 Mb/s\n802.11g -92 dBm @ 6 Mb/s\n802.11g -92 dBm @ 9 Mb/s\n802.11g -92 dBm @ 12 Mb/s\n802.11g -90 dBm @ 18 Mb/s\n802.11g -86 dBm @ 24 Mb/s\n802.11g -84 dBm @ 36 Mb/s\n802.11g -79 dBm @ 48 Mb/s\n802.11g -78 dBm @ 54 Mb/s |
Security: | |
Security algorithms: | 802.1x RADIUS,EAP,EAP-TLS,EAP-TTLS,PEAP,TKIP,WPA,WPA-AES,WPA2 |
Management features: | |
Web-based management: | ✗ |
Ports & interfaces: | |
Ethernet LAN (RJ-45) ports: | 1 |
Interface: | RJ-45 |
Power: | |
Power consumption (typical): | 12.95 W |
Power requirements: | 100 - 240V, 50/60Hz |
Design: | |
LED indicators: | Status, Y |
Certification: | FCC, RSS, EN, ARIB-STD, EMI, ICES, VCCI |
Internal: | ✗ |
Antenna: | |
Antenna features: | Detachable antenna |
Antenna gain level (max): | 6 dBi |
Performance: | |
Flash memory: | 32 MB |
Internal memory: | 128 MB |
Operational conditions: | |
Operating relative humidity (H-H): | 10 - 90% |
Operating temperature (T-T): | 0 - 40 °C |
Storage temperature (T-T): | -30 - 85 °C |
Weight & dimensions: | |
Dimensions (WxDxH): | 221 x 221 x 47 mm |
Weight: | 1.04 kg |
Other features: | |
Supported data transfer rates: | 1/2/5.5/6/9/11/12/18/24/36/48/54/150/300 Mbit/s |
Compliance industry standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.11a/b/g/n |
Wireless technology: | 802.11a/b/g/n |
Safety: | UL, CAN/CSA, IEC, EN |
Networking features: | Gigabit Ethernet |
Transmit power range: | 20 - 23 dBmW |
Operating temperature (T-T): | 32 - 104 °F |
Frequency range: | 2412 - 2462 MHz |
Power: | |
Output power description: | 44 - 57V DC |